The tank features:

Its main features:

1. Without a brace in the cabinet, box outside strengthen channel steel.

   
   

2. Measures without being limited by the geometry module, can make any size according to user requirements of the tank.

   
   

3. Weld less, can minimize due to welding quality closes nevertheless tank leakage problem.

   
   

4. With fixed number of year long.

   
   

5. The tank height general control under 3 m.

Second, the overview

Pu and water tank is made of high quality plate series, the argon arc welding. Health indicators of the series product identification, achieves the life drinking water health standards "GB5749-85, the series of water tank according to user requirements can be produced, it is not easy deformation and strong vibration resistance, corrosion resistance, easy cleaning and long service life, etc.

Third, scope of application

Mainly is suitable for the life, the regulation of building water supply, fire water tank, storage tank, the expansion of the heating system, condensation water tank, building construction, road construction, geological investigation and defense engineering such as temporary water tank. Tank storage cold already, also can store hot water, acid and alkali resistance, permeability, leakage, no deformation, no corrosion.

Four, when choosing that order shall provide water tank size, to take over the position, diameter size. Use water storage temperature 4-65 ℃ advisable when water temperature is higher than this value can be in order, shall be resolved. Water tank to the ground need to load shall be approved by design personnel shall prevail. Users with the water tank to take over the position of the seam on board, the company needs to be adjusted, the tube diameter is constant (without notice).

Five, installation and acceptance

1. When installation cabinet and wall body between not less than 700 mm access channel, tank top and the bottom is not less than 500 mm.

   
   

2. Civil engineering construction prepared piers, the tank unit at the bottom of plate between the joint to be located on the piers.

   
   

3. After assembly close outlet pipe and drain pipe, open the water pipe, water and check to fill water, 24 hours not slack for qualified.